[. . . ] WARNING: Do not connect the USB cable until step 14 to ensure that the software is installed successfully. Remove any packing material from the device, then close the print cartridge door. [. . . ] Windows: Once the USB prompt appears, connect the USB cable to the port on the back of the HP All-in-One, and then to any USB port on the computer. Now that you have finished setting up your HP All-in-One, you can try out a few of the features. Load the photo paper Cargue el papel fotográfico Pop out the photo paper cassette using the handle, and pull it out. Load the sheets of photo paper from the sample pack print-side down in the photo paper cassette. Line up the photo paper cassette with the far right side of the paper tray, and then slide it into the printer until it stops. Insert the memory card from your camera into the appropriate memory card slot and press the Photosmart Express button. If more than one memory card is inserted, unrecoverable data loss might occur. Press OK to select this picture, and follow the options on the color graphics display to print a borderless 4 x 6 inch photo. Now instead of printing a picture from your memory card, try making a photo reprint of a 4 x 6 inch photo. Insert the loaded photo cassette in the paper tray, if it is not already inserted. [. . . ] If several HP devices are installed, you might not see all of the device tabs in the device selection area. In this case, right and left arrow buttons are displayed to the right of the last tab shown in the device selection area that allow you to click through all of the tabs. [. . . ]